Sheeter

with slug-out system for A4 production.

BFE AB offers three different
models of sheeters for all types of
business forms press;

  • RL 1001 (mechanical) with double cut
  • RL 2000 (electronic) with double cut
  • RL 3000 (electronic) with double cut

Technical data RL 1001

Mechanical driven sheeter, mobil type connected to the printing press by a main drive shaft.

  • Maximum paper width 20 1/2"
  • Sheetlength 6 - 27"
  • Paper quality 60 - 160 g
  • Hardened infeed roller with two rubber wheels. Length slitter scissor type. REMARK! The slitter for two wide must be in the middle of the sheeter
  • Fix bottom knife
  • Vacuum in the knife cylinder for slug out when the double cut is used
  • Maximum speed 220 m/minute with 80 g paper
  • Vacuum outfeed for two wide
  • Cut size can be changed by change of one gear in steps of 1/6"
  • Gears for 12" (11 4/6"), 24" are included
  • Standard double-cut is 2/6" each 12"
  • Knife type, standard 1,05 x 23,8 mm
  • One set of registered rollers

Technical data RL 2000

Electronic driven sheeter, mobil type connected to the printing press via a pulse-transmitter, mounted to the press drive shaft.

  • Maximum paper width 20 1/2"
  • Sheetlength 6 - 27", special from 4"
  • Paper quality 60 - 150 g
  • Hardened infeed roller with two rubber wheels. Length slitter scissor type. REMARK! The slitter for two wide must be in the middle of the sheeter
  • Fix bottom knife, top knife for double or single cut
  • Vacuum in the knife cylinder for slug out when the double cut is used
  • Maximum speed 220 m/minute with 80 g paper
  • Vacuum outfeed for two wide
  • Cut size can be changed by change of one gear in steps of 1/6"
  • Gears for 12" (11 4/6"), 24" are included
  • Standard double-cut is 2/6" each 12"
  • Knife type, standard 1,05 x 23,8 mm
  • One set of registered rollers
  • Electrical specifikation 380 V 50 Hz 3 phase

Technical data RL 3000

Electronic driven sheeter, mobil type connected to the printing press via a pulse-transmitter, mounted to the press drive shaft.

  • Maximum paper width 20 1/2"
  • Sheetlength 6 - 27", special from 4"
  • Paper quality 60 - 160 g
  • Length slitter scissor type. REMARK! The slitter for two wide must be in the middle of the sheeter
  • Fix bottom knife, top knife for double or single cut
  • Vacuum in the knife cylinder for slug out when the double cut is used
  • Maximum speed 220 m/minute with 80 g paper
  • Vacuum outfeed for two wide
  • Cut size can be changed by a touch control in step of 1/6", cut tolerance +- 0,3 mm
  • Gears for 12" (11 4/6"), 24" are included
  • Standard double-cut is 2/6" each 12"
  • Knife type, standard 1,05 x 23,8 mm
  • Electrical specifikation 380 V 50 Hz 3 phase

Option

One set vacuum pump

Options for all models

Air operated knives for length slitting